Ford F-350 Super Duty 2017 Owner's Manual
![Ford F-350 Super Duty 2017 manual cover](/images/ppQUdoBeukGaBgqDiPgkNdSA/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the "ON" position without starting the engine. Use the arrow keys on the steering wheel to navigate to the "Settings" menu. Select "Vehicle" and then "Oil Life Reset." Press and hold the "OK" button until the display confirms that the oil life has been reset.
The recommended tire pressure for the Ford F-350 Super Duty 2017 can vary depending on the specific model and load. However, the general recommendation is 60 PSI for the front tires and 75 PSI for the rear tires. Always check the owner’s manual or the door jamb label for the exact specifications.
First, check the fuse related to the trailer brake controller. Inspect the trailer brake controller connections and wires for any damage or corrosion. Use the built-in diagnostics to see if any error codes are displayed. If issues persist, consult a professional technician.
The towing capacity of the 2017 Ford F-350 Super Duty varies by configuration. It can tow up to 21,000 pounds with a conventional hitch and up to 32,000 pounds with a fifth-wheel/gooseneck hitch. Always verify with your vehicle's specific configuration and consult the owner’s manual.
To replace the cabin air filter, open the glove box and remove the damper cord. Press in on the sides of the glove box to lower it completely. Locate the cabin air filter cover and remove the screws or clips. Replace the old filter with a new one, ensuring it is placed in the correct orientation. Reassemble everything in reverse order.
Ford recommends using Motorcraft® SAE 5W-40 Full Synthetic Diesel Motor Oil or equivalent for the 6.7L Power Stroke Diesel engine. For the 6.2L V8 gasoline engine, use Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil or equivalent. Always check your owner's manual for the correct specification.
The check engine light can illuminate for various reasons, including a loose gas cap, faulty oxygen sensor, or an issue with the catalytic converter. Use an OBD-II scanner to retrieve the trouble codes or consult a qualified mechanic for a thorough diagnosis.
To enable auto-lock, turn the ignition to the "ON" position. Access the vehicle settings through the dashboard menu. Navigate to "Locks" and select "Auto Lock." Follow the prompts to enable the feature.
Regular maintenance for the 2017 F-350 includes oil and filter changes every 7,500 miles, tire rotations every 10,000 miles, and comprehensive inspections at 20,000-mile intervals. Always refer to the owner’s manual for a detailed maintenance schedule.
To improve fuel efficiency, ensure regular maintenance, including air filter and oil changes. Maintain proper tire pressure, reduce excess weight, and drive at steady speeds. Using cruise control on highways and avoiding rapid acceleration can also help.