Ford F-250 Super Duty 2019 Owner's Manual
![Ford F-250 Super Duty 2019 manual cover](/images/rGKuLdJSoGCCfhcrCLSCwhRu/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the 'ON' position without starting the engine. Use the arrow buttons on the steering wheel to navigate to the 'Settings' menu, then select 'Advanced Settings'. From there, go to 'Vehicle', then 'Oil Life Reset', and press 'OK'. Hold 'OK' until the display shows the oil life is reset to 100%.
The recommended tire pressure for the 2019 Ford F-250 Super Duty typically ranges from 60 PSI for the front tires and 80 PSI for the rear tires. However, it's important to check the specific tire information placard located on the driver's side door jamb for exact specifications.
Improving fuel efficiency can be achieved by maintaining proper tire pressure, ensuring regular engine maintenance, reducing excess weight in the vehicle, and driving at steady speeds. Avoiding unnecessary idling and using cruise control on highways can also help improve fuel efficiency.
Ford recommends using SAE 5W-30 full synthetic engine oil for the 2019 F-250 Super Duty equipped with a gasoline engine. For diesel engines, SAE 10W-30 or SAE 15W-40 diesel engine oil is recommended. Always check the owner’s manual for specific oil recommendations.
If the 4WD is not engaging, check the 4WD fuse and ensure it is intact. Inspect the transfer case motor and wiring for any damage. Verify that the 4WD switch is functioning properly. If issues persist, it may require a professional diagnostic to check the transfer case and related components.
The towing capacity of the 2019 Ford F-250 Super Duty varies depending on the engine and configuration. With the 6.2L V8 engine, it can tow up to 15,000 pounds, and with the 6.7L Power Stroke® V8 Turbo Diesel, it can tow up to 21,000 pounds with a conventional hitch, and up to 35,000 pounds with a fifth-wheel/gooseneck hitch.
The air filter should be inspected at every oil change and replaced every 30,000 miles or as needed based on driving conditions. If you frequently drive in dusty or off-road conditions, more frequent replacements may be necessary.
The check engine light can illuminate for various reasons, such as a loose gas cap, faulty oxygen sensor, or issues with the catalytic converter. It is recommended to use an OBD-II scanner to retrieve the diagnostic trouble code (DTC) or visit a certified mechanic for a thorough inspection.
To change the cabin air filter, locate the filter housing behind the glove compartment. Open the glove compartment and release its sides to lower it completely. Remove the cabin air filter cover, take out the old filter, and insert the new one, ensuring it is oriented correctly. Reinstall the cover and glove compartment.
The maintenance schedule for the 2019 Ford F-250 Super Duty includes regular oil and filter changes every 7,500 miles, tire rotations every 10,000 miles, and brake inspections every 20,000 miles. Additionally, replace the engine air filter and fuel filter every 30,000 miles, and inspect the cooling system and hoses every 60,000 miles. Always refer to the owner’s manual for comprehensive maintenance guidelines.