Ford F-150 2022 Owner's Manual

To reset the oil life indicator, turn on the ignition without starting the engine, use the steering wheel controls to navigate to the "Settings" menu on the dashboard screen, select "Advanced Settings," then "Vehicle," then "Oil Life Reset," and hold the "OK" button until the display confirms the reset.
The recommended tire pressure for the 2022 Ford F-150 is typically 35 PSI for both front and rear tires. However, always refer to the tire information label located on the driver’s side door jamb for the most accurate information.
To pair your smartphone with the Ford SYNC system, turn on Bluetooth on your phone, press the "Phone" button on your SYNC system, select "Add a Device," and follow the on-screen prompts to complete the pairing process, including confirming the PIN displayed on your phone matches the one on the SYNC screen.
If the Check Engine Light illuminates, ensure the gas cap is properly tightened, as a loose cap can trigger the light. If the light remains on, consider using an OBD-II scanner to check for diagnostic trouble codes or consult a professional mechanic for further diagnosis.
Ford typically recommends changing the air filter every 15,000 to 30,000 miles. However, if you drive in dusty conditions, you may need to replace it more frequently. Always check your owner’s manual for specific recommendations.
Ford recommends using SAE 5W-30 full synthetic oil for the 2022 F-150. Always refer to your owner’s manual for the most accurate and specific oil requirements for your engine type.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements, maintain proper tire pressure, reduce excess weight in the vehicle, and drive at steady speeds, avoiding rapid acceleration and braking.
The 2022 Ford F-150 can tow up to 14,000 pounds when properly equipped. This capability depends on factors such as engine choice, axle ratio, and other configurations, so check your owner’s manual or Ford's official specifications for your specific setup.
To engage four-wheel drive, locate the 4WD mode selector on the dashboard, and turn the knob to the desired mode (4H, 4L, etc.). It is recommended to switch to 4WD while the vehicle is stationary or moving slowly to ensure proper engagement.
If your F-150 has a dead battery, you can jump-start it using jumper cables and another vehicle, ensuring both vehicles are off, connecting the cables in the proper order, and running the assisting vehicle for a few minutes before attempting to start your F-150. Consider replacing the battery if the issue persists.