Ford F-150 2020 Owner's Manual
![Ford F-150 2020 manual cover](/images/REQXsoDkDIYNEXDpMRtLcXYS/thumbs/thumb175x175.webp)
To reset the oil change reminder: Turn on the ignition without starting the engine. Use the arrow buttons on the steering wheel to navigate to the "Settings" menu. Select "Advanced Settings," then "Vehicle," and finally "Oil Life Reset." Hold down the "OK" button until the oil life resets to 100%.
The recommended tire pressure for the Ford F-150 2020 is typically 35 PSI, but it is best to check the sticker on the driver's side door jamb for the exact specifications for your specific vehicle model and load conditions.
To improve fuel efficiency, maintain proper tire pressure, perform regular engine maintenance, use the recommended grade of motor oil, reduce excess weight, and drive at a consistent speed. Using cruise control on highways can also help.
The Ford F-150 2020 typically requires SAE 5W-20 or 5W-30 synthetic blend motor oil. Refer to your owner's manual for the exact oil specification recommended for your engine type.
To connect your smartphone, enable Bluetooth on your device. On the SYNC 3 screen, select "Phone," then "Add a Phone." Follow the on-screen instructions to pair your phone. Confirm the pairing code on both your phone and the SYNC 3 system.
A squealing noise when braking often indicates worn brake pads or rotors. Inspect the brake components for wear and replace them if necessary. If the brakes are new, they may need a break-in period to eliminate the noise.
If the check engine light comes on, ensure the gas cap is tightly closed, as a loose cap can trigger the light. If the light remains on, use an OBD-II scanner to check for diagnostic trouble codes or visit a qualified mechanic for a detailed inspection.
To enable towing mode, locate the "Towing" button on the dashboard, typically near the gear shift. Press the button to activate towing mode, which adjusts the transmission shift pattern and engine response to better handle towing loads.
The towing capacity of the Ford F-150 2020 varies based on the engine and configuration, ranging from approximately 5,000 to 13,200 pounds. Consult your owner's manual or Ford's official resources for specifics related to your vehicle's setup.
To replace the cabin air filter, open the glove box and remove the contents. Press in the sides of the glove box to release it and lower it fully. Locate the cabin air filter cover, unclip it, and remove the old filter. Insert the new filter with the airflow direction arrow pointing correctly, then reassemble the glove box.