Ford F-150 2017 Owner's Manual
![Ford F-150 2017 manual cover](/images/DwJZPCfxbIdPfeyClmpjJVyX/thumbs/thumb175x175.webp)
To reset the oil change light on your 2017 Ford F-150, turn the ignition to the "on" position without starting the engine. Use the controls on the steering wheel to navigate to the 'Settings' menu, then go to 'Vehicle Maintenance'. Select 'Oil Life Reset' and hold the 'OK' button until the oil life resets to 100%.
The recommended tire pressure for a 2017 Ford F-150 is typically 35 PSI for both the front and rear tires. However, always check the sticker located on the driver’s side door jamb for the most accurate information for your specific vehicle.
First, check the fuse for the tail lights in the fuse box under the hood. If the fuse is intact, inspect the bulb for any signs of damage or burnout. Additionally, check the wiring connection at the tail light assembly for any loose or corroded connectors.
For a 2017 Ford F-150, it is recommended to use SAE 5W-30 motor oil that meets Ford specification WSS-M2C946-A. Always refer to the owner's manual for the most accurate information.
To pair your smartphone with the SYNC 3 system, enable Bluetooth on your phone. On the SYNC 3 screen, go to 'Settings', then 'Bluetooth', and select 'Add a Device'. Follow the prompts on both the screen and your phone to complete the pairing process.
If the check engine light comes on, first ensure your gas cap is tightened properly. If the light remains, use an OBD-II scanner to read the error codes or take your vehicle to a professional mechanic to diagnose the issue.
To replace the cabin air filter, locate the filter housing behind the glove box. Remove the glove box by pressing in the sides and lowering it. Open the filter housing cover, remove the old filter, and insert the new one, ensuring the airflow direction arrows are correctly aligned.
The towing capacity of a 2017 Ford F-150 varies based on the engine, drivetrain, and configuration, ranging from 5,000 to 12,200 pounds. Check your specific model's manual or Ford's official resources for exact figures.
To improve fuel efficiency, ensure your tires are properly inflated, use the recommended engine oil, remove excess weight from the vehicle, and maintain a steady speed while driving. Regular maintenance, such as air filter and spark plug changes, can also help.
To activate 4WD on your 2017 Ford F-150, shift into neutral, then use the 4WD mode selector on the dashboard to choose between 4WD High or 4WD Low. Once selected, shift back into drive to engage the mode. Always refer to your owner’s manual for specific instructions.