Ford Explorer 2021 Owner's Manual
![Ford Explorer 2021 manual cover](/images/zQNGOOkNbvJhXtUzsLJPOSjS/thumbs/thumb175x175.webp)
The recommended oil type for the 2021 Ford Explorer is SAE 5W-30 full synthetic oil. Always check your owner's manual for the exact specifications.
To reset the oil change light, turn on the ignition without starting the engine. Use the arrow buttons on the steering wheel to navigate to "Settings," then "Vehicle," and select "Oil Life Reset." Press and hold the "OK" button until the reset is complete.
The 2021 Ford Explorer has a towing capacity of up to 5,600 pounds when properly equipped with the Class III Trailer Tow Package.
To pair your smartphone with the SYNC 3 system, enable Bluetooth on your phone. On the vehicle's touchscreen, select "Phone," then "Add a Device." Follow the prompts on both your phone and the vehicle display to complete the pairing process.
It is recommended to change the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check the owner's manual for specific intervals.
If your engine overheats, turn off the air conditioning and turn on the heater to maximum. Pull over safely, turn off the engine, and wait for it to cool down before checking the coolant level. Do not open the radiator cap while the engine is hot.
To replace a flat tire, locate the spare tire and jack. Use the lug wrench to loosen the lug nuts, then jack up the vehicle. Remove the lug nuts and the flat tire, replace it with the spare, then tighten the lug nuts in a star pattern. Lower the vehicle and ensure all nuts are secure.
The recommended tire pressure for the 2021 Ford Explorer is typically 35 PSI for all four tires. Always verify with the label on the driver's side door jamb or the owner's manual.
To use adaptive cruise control, press the "On" button on the steering wheel. Set your desired speed using the "+/-" buttons. Adjust the gap setting to control the distance from the vehicle ahead. The system will automatically adjust speed to maintain a safe following distance.
Common causes for a check engine light include a loose gas cap, faulty oxygen sensor, catalytic converter issues, or spark plug/ignition coil problems. It's best to have the vehicle diagnosed with an OBD-II scanner to identify the exact issue.