Ford Expedition 2021 Owner's Manual
![Ford Expedition 2021 manual cover](/images/lUzttfhZWLoNaRaTqfyYquXw/thumbs/thumb175x175.webp)
To pair your smartphone, ensure Bluetooth is enabled on your device. On the SYNC 3 home screen, tap 'Phone', then 'Add Phone'. Follow the on-screen instructions to complete the pairing process.
The recommended oil type for the Ford Expedition 2021 is SAE 5W-30 full synthetic motor oil. Always refer to the owner’s manual for specific recommendations.
To reset the oil change light, turn the ignition to the 'On' position without starting the engine. Use the steering wheel controls to navigate to 'Settings', then 'Oil Life Reset'. Press and hold 'OK' until the oil life resets to 100%.
First, check the battery in your key fob and replace it if necessary. If the issue persists, check the vehicle's fuses related to the keyless entry system or consult a Ford technician.
To enable automatic high beams, go to the SYNC 3 screen, select 'Settings', then 'Vehicle', and toggle 'Automatic High Beams' to 'On'. Automatic high beams will activate when the system detects low-light conditions.
To perform a factory reset, go to the SYNC 3 screen, select 'Settings', then 'General', and scroll down to 'Reset'. Tap 'Master Reset' and confirm your selection to reset the system to factory settings.
The Ford Expedition 2021 has a maximum towing capacity of up to 9,300 pounds when properly equipped with the Heavy-Duty Trailer Tow Package.
You can check the tire pressure using the Tire Pressure Monitoring System (TPMS) on the instrument cluster. Navigate to the 'Tire Pressure' screen using the steering wheel controls to view each tire's pressure.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Twist the bulb socket counterclockwise to remove it, replace the bulb, and reinsert the socket into the assembly, turning it clockwise to secure it.
To update navigation maps, visit the official Ford website, download the latest map update to a USB drive, and insert it into the vehicle's USB port. Follow the on-screen instructions on the SYNC 3 system to complete the update.