Ford EcoSport 2020 Owner's Manual
![Ford EcoSport 2020 manual cover](/images/egJkgdRoQpQBLWApLcSSGqow/thumbs/thumb175x175.webp)
The recommended tire pressure for the Ford EcoSport 2020 is 33 PSI for both the front and rear tires. Always check the tire pressure when the tires are cold for accurate readings.
For the Ford EcoSport 2020, it is recommended to change the oil every 7,500 miles or every 12 months, whichever comes first. Regular oil changes help ensure optimal engine performance.
The Ford EcoSport 2020 typically requires 5W-20 synthetic blend motor oil. Refer to your owner's manual for the most accurate specifications based on your driving conditions.
To reset the oil change light on your Ford EcoSport 2020, turn the ignition to the "on" position without starting the engine. Then, press the gas and brake pedals simultaneously and hold them for about 20 seconds until the "Service: Oil Reset Complete" message appears.
The Ford EcoSport 2020 has a towing capacity of up to 2,000 pounds when properly equipped with the towing package. Always ensure you do not exceed this limit to maintain vehicle safety.
To connect your smartphone via Bluetooth, enable Bluetooth on your phone and go to the SYNC 3 touchscreen on your EcoSport. Select "Add Phone" and follow the prompts to pair your device. Ensure your phone is discoverable during this process.
If the check engine light illuminates, first ensure your gas cap is tight as this can trigger the light. If the light remains on, it's advisable to have the vehicle checked by a professional to diagnose and address any potential issues.
To replace the cabin air filter, open the glovebox and disconnect the dampener cord. Push the glovebox sides inwards to drop it down, then remove the filter cover. Replace the old filter with a new one, ensuring it is oriented correctly, then reassemble.
To jump-start the Ford EcoSport 2020, connect the red positive cable to the positive terminal of the dead battery and the other end to the positive terminal of the live battery. Connect the black negative cable to the negative terminal of the live battery and the other end to a metal ground on the EcoSport. Start the assisting vehicle, then your EcoSport.
To update the SYNC 3 software, connect your vehicle to a Wi-Fi network. Go to Settings > General > Automatic Updates on the SYNC 3 screen and select "Scan for Updates." Follow the on-screen instructions to complete the update process.