Ford Contour 2000 Owner's Manual
![Ford Contour 2000 manual cover](/images/FSjBOrgleQhQDOmuNhsndwBu/thumbs/thumb175x175.webp)
To reset the check engine light, disconnect the negative battery cable for about 15 minutes. Reconnect it, start the engine, and the light should be reset. If it remains on, further diagnostics may be needed.
The recommended oil type for the Ford Contour 2000 is 5W-30. Always check the owner's manual for the most accurate specifications.
To change the air filter, locate the air filter housing in the engine bay. Unclip or unscrew the housing, remove the old filter, and replace it with a new one. Ensure it's seated properly before securing the housing.
The recommended tire pressure for the Ford Contour 2000 is typically 32 psi for both front and rear tires, but you should verify this with the sticker located on the driver's side door jamb.
Begin by checking the AC fuse and relay. Ensure the refrigerant level is adequate and inspect for any visible leaks. If issues persist, consider having a professional diagnose the compressor or other components.
To replace spark plugs, first disconnect the battery, remove the engine cover if necessary, and then remove the ignition coil or spark plug wire on each plug. Use a spark plug socket to remove the old plugs, and install new ones with the correct gap. Reattach components.
Check the coolant level and ensure there are no leaks. Inspect the radiator and hoses for blockages or damage. The thermostat and water pump should also be checked if overheating persists.
The timing belt in a Ford Contour 2000 should typically be replaced every 60,000 to 100,000 miles, depending on driving conditions and the specific engine model. Consult the owner's manual for exact intervals.
Check the transmission fluid level and condition. If low, add the correct type of fluid. If the fluid is burnt or contaminated, a transmission service may be needed. Persistent issues should be evaluated by a professional.
Maintain regular service intervals, keep tires properly inflated, and use the recommended grade of motor oil. Avoid excessive idling and aggressive driving to optimize fuel efficiency.