Flir Extech SDL730 User Manual

To calibrate the SDL730 Manometer, connect it to a known pressure source and follow the calibration instructions in the user manual. Ensure that the device is in calibration mode and adjust the readings accordingly.
To replace the battery, first turn off the manometer. Open the battery compartment located on the back of the device, remove the old batteries, and insert new ones, ensuring correct polarity. Close the compartment securely.
If the manometer doesn't turn on, check the battery for charge and correct installation. If the battery is fine, inspect the device for any visible damage or obstructions in the battery compartment. If the issue persists, consult the manual or contact customer support.
Ensure the device is properly calibrated and there are no leaks in the connections. Check the sensor for any obstructions or contaminants. Re-calibrate if necessary, and consult the manual for detailed troubleshooting steps.
Yes, the SDL730 Manometer can log data for extended periods. Set the logging interval according to your needs in the device settings, and ensure sufficient battery life or connect to an external power source if necessary.
To export data, connect the manometer to a computer using the provided USB cable. Use the compatible software to download and manage your data. Refer to the user manual for specific software installation and usage instructions.
Regularly check the device for any physical damage, clean the sensor area, and ensure the battery is in good condition. Periodically calibrate the manometer to maintain accuracy and store it in a dry environment when not in use.
To reset the SDL730 Manometer to factory settings, refer to the user manual for the specific reset procedure. Typically, this involves holding down specific buttons while turning the device on.
Yes, the SDL730 Manometer is capable of measuring differential pressure. Connect the positive and negative ports to the respective pressure sources and select the differential pressure mode on the device.
The SDL730 Manometer is suitable for indoor and outdoor environments, but it should be protected from extreme temperatures, high humidity, and direct exposure to water. Ensure the device is used within the specified operating conditions outlined in the manual.