Flir Extech HT200 User Manual
![Flir Extech HT200 Meter manual cover](/images/dfsrYHHqQbyJgksKOXvUQfqF/thumbs/thumb175x175.webp)
To calibrate the HT200 Meter, follow the instructions provided in the user manual. Typically, you will need to use a standard calibration source and adjust the device settings until the meter reading matches the source. Ensure the device is at room temperature and perform the calibration in a controlled environment.
To maintain the HT200 Meter, use a soft, damp cloth to clean the exterior. Avoid using harsh chemicals or solvents. Ensure the device is turned off and disconnected from any power sources before cleaning. Regularly check the sensor and connectors for dust or debris.
If the HT200 Meter is not turning on, check the battery level and replace it if necessary. Ensure the battery is inserted correctly. If the issue persists, inspect the battery contacts for corrosion and clean them gently. If the problem continues, consult the user manual or contact customer support.
Yes, the HT200 Meter can measure both AC and DC current. Make sure to set the meter to the correct mode for the type of current you wish to measure. Refer to the device's manual for specific instructions on how to switch between modes and connect the leads properly.
If the readings are inaccurate, first verify that the meter is properly calibrated. Check the probe connections and ensure they are secure. Inspect the probes for any damage and replace them if necessary. If inaccuracies persist, reset the meter to factory settings and recalibrate.
To extend battery life, turn off the meter when not in use and use the auto-off feature if available. Reduce the backlight brightness and disable any unnecessary features. Regularly check and replace batteries to prevent leakage and damage.
The HT200 Meter is not fully waterproof or dustproof. It is recommended to use the meter in a dry and clean environment. If exposure to moisture or dust is unavoidable, consider using protective cases or covers to safeguard the device.
To update the firmware, connect the HT200 Meter to a computer using the provided USB cable. Visit the manufacturer's website to download the latest firmware version. Follow the on-screen instructions to complete the update process. Ensure the device remains connected during the update.
If the display is not working, check the battery level and replace if necessary. Ensure the device is turned on and inspect the display for any physical damage. Reset the device by removing and reinserting the batteries. If the issue persists, contact customer support.
The HT200 Meter is designed to handle a specific range of voltages. Refer to the user manual to verify the maximum voltage the meter can safely measure. For high voltage applications, ensure you have the appropriate probes and follow all safety guidelines to prevent accidents.