Flir Extech CG304 User Manual

Flir Extech CG304 Tester manual cover
Pages 13
Year 2015
Language(s)
English en

Flir Extech CG304 Tester Specification

The Flir Extech CG304 Tester is a highly advanced coating thickness gauge designed for precision measurement of coating thickness on various substrates. This device integrates dual technology capabilities to measure both non-magnetic coatings on ferrous metals and non-conductive coatings on non-ferrous metals. The CG304 boasts an ergonomic design for ease of use in field and laboratory environments, featuring a user-friendly interface with a large, backlit LCD screen that provides clear readings even in low-light conditions.

Equipped with a built-in probe, the CG304 offers a measurement range of 0 to 1250 microns (0 to 50 mils), with an accuracy of ±3% + 1 micron, ensuring reliable and repeatable results. The device supports both continuous and single measurement modes, enhancing versatility for different inspection requirements. Data storage capabilities allow for the retention of up to 255 readings, facilitating comprehensive data management and analysis. The CG304 also includes a USB interface for easy data transfer to PCs for further evaluation.

Additionally, the device employs automatic substrate recognition, which optimizes efficiency by eliminating the need for manual calibration adjustments between different materials. Powered by standard AA batteries, the CG304 ensures long-lasting operation and portability. The Flir Extech CG304 is an essential tool for professionals in industries such as automotive, manufacturing, and quality control, seeking to maintain high standards of product quality and durability through precise coating thickness measurements.

Flir Extech CG304 Tester F.A.Q.

How do I calibrate the Flir Extech CG304 Tester?

To calibrate the CG304 Tester, use the calibration foils provided with your device. Follow the instructions in the user manual, ensuring the tester is on a flat surface and at room temperature.

What steps should I take if the CG304 Tester gives inconsistent readings?

If inconsistent readings occur, ensure the surface being tested is clean and dry. Recalibrate the device and check the probe for damage or debris.

Can the CG304 Tester measure non-magnetic coatings on non-ferrous metals?

Yes, the CG304 Tester can measure non-magnetic coatings such as paint on non-ferrous metals like aluminum using the eddy current principle.

How often should I perform maintenance on the CG304 Tester?

Regular maintenance should be performed every 6 months, including cleaning the probe and recalibrating the device to ensure accurate measurements.

What should I do if the CG304 Tester does not turn on?

Check the battery compartment for correct placement and ensure the batteries are charged. If the problem persists, consult the troubleshooting section of the manual.

How can I store the CG304 Tester to prolong its lifespan?

Store the CG304 Tester in a cool, dry place within its protective case. Remove the batteries if storing for an extended period to prevent battery leakage.

What is the best way to clean the probe of the CG304 Tester?

Use a soft, lint-free cloth dampened with a mild detergent solution. Gently wipe the probe, avoiding any harsh chemicals or abrasive materials that could damage it.

How do I interpret the measurement results on the CG304 Tester display?

The CG304 Tester display shows the thickness of the coating in either micrometers or mils. Refer to the manual for conversion charts if needed.

Can the CG304 Tester be used on curved surfaces?

Yes, the CG304 Tester can be used on curved surfaces, but accuracy may vary. Ensure the probe makes full contact with the surface for the best results.

What is the operating temperature range for the CG304 Tester?

The CG304 Tester operates optimally within a temperature range of 0°C to 50°C (32°F to 122°F). Avoid using it outside of this range to ensure accurate readings.