Flir Extech AN100 User Manual

Pages 10

Year 2013

Language(s)

of 10

Flir Extech AN100 Meter Specification

The Flir Extech AN100 Meter is a robust and versatile anemometer designed to accurately measure air velocity, air flow, and temperature, making it an essential tool for HVAC professionals and environmental engineers. This device is equipped with a large, easy-to-read LCD display that shows simultaneous air flow and temperature readings. The AN100 offers a range of air velocity measurements from 80 to 5900 feet per minute, with selectable units in meters per second, kilometers per hour, knots, and miles per hour. It also measures air flow in cubic feet per minute and cubic meters per hour, providing comprehensive data for analysis.

The meter features a built-in microprocessor that ensures high precision and reliable performance. It is equipped with a vane sensor that provides accurate measurements even at low air velocities. The device supports a temperature range from 14 to 140 degrees Fahrenheit, with a resolution of 0.1 degree and an accuracy of ±1.5 degrees. The AN100 includes a data hold function, allowing users to freeze readings on the display for easy recording, and a min/max function to capture the highest and lowest readings during measurements.

This meter is designed with ease of use in mind, featuring intuitive controls and a lightweight, portable form factor that makes it suitable for both fieldwork and laboratory conditions. It operates on a 9-volt battery, ensuring long-term use without frequent recharging. The Flir Extech AN100 is a reliable and efficient tool for professionals who require precise air flow and temperature measurements, combining advanced technology with user-friendly features to meet the demands of various applications.

Flir Extech AN100 Meter F.A.Q.

How do I calibrate the Flir Extech AN100 meter?

To calibrate the Flir Extech AN100, ensure the device is turned off. Press and hold the 'Cal' button while turning the device on. Follow the on-screen instructions to complete the calibration process.

What should I do if the display is not showing any readings?

If the display is not showing readings, check the battery level and replace the batteries if necessary. Also, ensure the probe is properly connected and that the device is turned on.

How can I measure airflow using the Flir Extech AN100?

To measure airflow, connect the vane probe to the meter and select the desired unit of measurement. Position the probe in the airflow path and read the measurement on the display.

What maintenance is required for the Flir Extech AN100?

Regular maintenance includes checking and replacing the batteries, cleaning the vane probe, and storing the meter in a protective case to prevent damage.

How do I replace the batteries in the Flir Extech AN100?

To replace the batteries, open the battery compartment on the back of the device, remove the old batteries, and insert new AA batteries, ensuring correct polarity.

Why is the airflow measurement inaccurate or inconsistent?

Ensure the vane probe is clean and unobstructed. Check for any kinks in the cable and verify that the unit is properly calibrated.

Can I use the Flir Extech AN100 in high humidity environments?

Yes, the Flir Extech AN100 is designed to operate in various environmental conditions, including high humidity, but avoid direct exposure to water or condensation.

How do I switch between units of measurement on the Flir Extech AN100?

Press the 'Unit' button to cycle through the available units of measurement until the desired unit is displayed on the screen.

What should I do if the Flir Extech AN100 is not turning on?

Check the battery installation to ensure proper contact and polarity. Replace the batteries if necessary. If the issue persists, consult the user manual or contact technical support.

How can I reset the Flir Extech AN100 to its factory settings?

To reset to factory settings, turn off the device, press and hold the 'Reset' button (if available), and turn the device back on while holding the button. Follow any additional on-screen prompts.