Dyson DC21 Stowaway Owner’s Manual

To assemble the Dyson DC21 Stowaway, first attach the hose to the main body. Then, connect the wand to the hose and attach the floor tool to the end of the wand. Make sure all connections click into place securely.
If your Dyson DC21 loses suction, check for blockages in the hose, wand, and floor tool. Also, ensure that the dustbin is not full and that the filters are clean.
It is recommended to clean the filters on your Dyson DC21 once a month. Rinse them under cold water and allow them to dry completely before reinstalling.
To empty the dustbin, press the release button to detach it from the main body. Hold the dustbin over a trash can and press the button to release the base flap. Ensure all debris is removed before reattaching it.
If the brush bar is not spinning, check for any obstructions or tangled hair. Remove any debris and ensure the brush bar is correctly seated. Also, verify if the brush control setting is in the correct position.
Yes, the Dyson DC21 is suitable for hardwood floors. Ensure you use the appropriate floor tool setting to prevent scratching or damage to the surface.
Regular maintenance includes emptying the dustbin, cleaning the filters monthly, checking for blockages, and inspecting the brush bar for debris.
To store the Dyson DC21, retract the wand and wrap the hose around the main body. Secure it with the provided clip, and keep it in a dry location.
A loud noise could indicate a blockage or that the filter needs cleaning. Check for obstructions in the hose and ensure the filter is washed and dried properly.
If the Dyson DC21 overheats, turn it off and unplug it. Check for blockages and clean the filters. Allow the vacuum to cool down completely before using it again.