Dodge Charger 2009 Quick Reference Guide
![Dodge Charger 2009 Sedan manual cover](/images/PzANbRmHOTExApeywWOslhwp/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, inflate all tires to the recommended pressure level, then drive the vehicle above 15 mph for at least 10 minutes. The system should automatically reset. If the warning light persists, consult your owner's manual or a professional mechanic.
The 2009 Dodge Charger typically requires 5W-20 synthetic motor oil. However, always refer to the owner's manual for the most accurate information specific to your engine type.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes and air filter replacements. Maintain proper tire pressure, and avoid excessive idling and aggressive driving.
If the engine overheats, pull over safely and turn off the engine immediately. Allow the engine to cool before checking coolant levels. If necessary, add coolant and inspect for leaks. Seek professional help if the problem persists.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Remove the power connector, then twist the bulb socket counterclockwise to remove it. Replace with a new bulb and reassemble.
A squealing noise when braking often indicates that the brake pads are worn out and need replacement. It can also be due to dust or debris on the brake components. Inspect the brakes and replace pads if necessary.
A rough idle can be caused by dirty or faulty spark plugs, a clogged air filter, or fuel system issues. Performing a thorough inspection of these components and replacing them if needed can resolve the issue.
For the 2009 Dodge Charger, it's generally recommended to change the transmission fluid every 60,000 miles. However, refer to your owner's manual for specific intervals based on driving conditions.
Common causes of battery drain include leaving lights or accessories on, a faulty alternator, or a parasitic draw from electrical components. Check these factors if experiencing frequent battery drain.
To program a new key fob, insert the existing key into the ignition and turn it to the 'ON' position. Press the 'Unlock' button on the driver's door, then hold the 'Unlock' and 'Panic' buttons on the new fob simultaneously for a few seconds. Release, then press 'Unlock' and 'Lock' together. The new fob should be programmed.