Dodge Durango 2020 Quick Reference Guide
![Dodge Durango 2020 SUV manual cover](/images/UYzkietLollSGeLkJfqJYuTw/thumbs/thumb175x175.webp)
To reset the oil change indicator, turn the ignition to the "ON" position without starting the engine. Fully depress the accelerator pedal slowly three times within 10 seconds. Turn the ignition to the "OFF" position. The system should reset.
The 2020 Dodge Durango typically requires SAE 5W-20 full synthetic engine oil. However, it's best to check the owner's manual for specifics related to your engine type.
The check engine light could indicate a variety of issues, from a loose gas cap to more serious engine problems. It's advisable to use an OBD-II scanner to retrieve the error code or take the vehicle to a certified mechanic for diagnosis.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, remove excess weight, and avoid aggressive driving. Using cruise control on highways can also help maintain consistent speeds and save fuel.
Noisy brakes may indicate worn brake pads or rotors. Inspect the brake system for wear and tear. If unsure, have a professional mechanic evaluate the brakes to determine if replacement is necessary.
To pair your smartphone, turn on Bluetooth on your phone, select "Uconnect" from the list of devices, and follow the prompts on both the phone and the vehicle's touch screen to complete the pairing process.
Yes, the 2020 Dodge Durango can tow a trailer. The towing capacity varies depending on the engine type, with the V6 model capable of towing up to 6,200 pounds and the V8 models up to 8,700 pounds. Always consult the owner's manual for specific towing guidelines and ensure your Durango is equipped with the required towing package.
Follow the manufacturer's recommended maintenance schedule, which includes regular oil changes every 6,000 miles, tire rotations every 6,000 miles, and brake inspections. Refer to the owner's manual for a detailed schedule and any additional maintenance tasks.
To replace the cabin air filter, open the glove box, remove the dampener cord, and press inward on the sides of the glove box to release it. The filter housing is located behind the glove box. Remove the old filter and install a new one, ensuring it's properly seated.
Overheating may be caused by low coolant levels, a malfunctioning thermostat, a faulty water pump, or a blocked radiator. It's important to check the coolant level and inspect for leaks. If the problem persists, seek professional assistance.