Dimplex M2GT Instruction Manual V1
![Dimplex M2GT Heater manual cover](/images/DYMPiWhJEdsBhjvmMVbzqkEE/thumbs/thumb175x175.webp)
To set the thermostat, turn the dial to your desired temperature setting. The heater will automatically maintain this temperature by switching on and off as needed.
First, check the power supply and ensure the heater is plugged in properly. Then, verify the circuit breaker hasn't tripped. If these are in order, consult the user manual for further troubleshooting steps.
Ensure the heater is turned off and unplugged. Use a soft, damp cloth to wipe the exterior surfaces. Avoid using harsh chemicals or abrasive materials.
Unusual noises could be due to a loose part or debris inside the heater. Make sure the heater is off and unplugged before inspecting. If the noise persists, contact customer support for assistance.
The Dimplex M2GT Heater is not designed for use in damp or wet locations, such as bathrooms. Using it in such areas may pose a safety risk.
To reset the heater, turn the power switch off and then back on. If necessary, adjust the thermostat to the desired setting.
Regularly check and clean the heater's surface every few months and inspect for any signs of wear or damage. Annual professional servicing is recommended for optimal performance.
Ensure the heater is turned off and unplugged. Allow it to cool before moving. Handle it with care to avoid damaging the unit.
Immediately turn off and unplug the heater. Inspect for any visible damage or debris. If the smell persists, discontinue use and contact customer support for assistance.
Ensure the room is well-insulated to retain heat. Set the thermostat to a moderate temperature and use the heater only when needed to conserve energy.