Dimplex DEOC15 Instruction Manual V1
![Dimplex DEOC15 Radiator manual cover](/images/mEKNpvWlBjAeKnLrIIliSLRY/thumbs/thumb175x175.webp)
To install the Dimplex DEOC15 Radiator, first ensure that it is positioned at least 150mm away from any wall or furniture. Secure the radiator using the provided wall brackets, following the instructions in the user manual. Make sure the radiator is connected to an appropriate electrical outlet.
If the radiator is not heating properly, check that it is plugged in and switched on. Verify that the thermostat is set to a high enough temperature. If the issue persists, inspect the power supply and consult the troubleshooting section of the user manual.
To clean the radiator, ensure it is turned off and cooled down. Use a soft, damp cloth to wipe the exterior. Avoid using any abrasive cleaners or solvents. Regularly check for blockages in air vents and remove any dust buildup.
Yes, the Dimplex DEOC15 Radiator is designed to be safe for overnight use, as it features overheat protection and a thermostat. However, ensure it is placed away from combustible materials and set to a safe temperature.
To set the timer, access the control panel and press the timer button. Use the increase and decrease buttons to set the desired on and off times. Confirm your settings by pressing the timer button again.
The 'E1' error code indicates a fault with the temperature sensor. Turn off the radiator, unplug it, and wait for a few minutes before restarting. If the error persists, contact customer support for assistance.
The Dimplex DEOC15 Radiator is not designed for bathroom use unless specifically stated in the manual. It must be installed outside of any zone where it could come into contact with water.
To use the radiator efficiently, set the thermostat to the lowest comfortable setting and utilize the timer to match your daily schedule. Ensure that doors and windows are closed to retain heat.
To reset the radiator after a power outage, switch it off and unplug it for a few minutes. Plug it back in and turn it on, then reconfigure any settings such as the timer or thermostat as needed.
If the radiator makes unusual noises, ensure it is placed on a stable surface. Check for any debris or obstructions in the vents. If noise persists, consult the manual or contact customer support for further guidance.