Dimplex AC45N-C Parts Manual V1

To set the temperature, use the control panel to select your desired temperature. The digital display will show the current setting. Refer to the user manual for detailed steps.
Ensure the heater is plugged into a working outlet and the power switch is turned on. Check for any tripped circuit breakers or blown fuses in your electrical panel.
Turn off the heater and unplug it from the power source. Remove the filter according to the instructions in the manual and clean it with a vacuum or rinse it under warm water. Ensure it is completely dry before reinstalling.
Unusual noises can be due to loose components or debris trapped in the heater. Turn off the unit and inspect it for any visible issues. If noise persists, contact Dimplex customer support.
Regularly clean the air filter and inspect the power cord and plug for signs of wear or damage. Schedule annual inspections for internal components if used heavily.
After a power outage, switch the heater off and unplug it for 5 minutes. Plug it back in and turn it on to reset the system.
It is not recommended to use an extension cord with the heater. This can pose a safety risk and void the warranty. Always plug the heater directly into a wall outlet.
Access the timer settings via the control panel. Set the desired on and off times following the instructions in the user manual to ensure proper configuration.
Ensure the air filter is clean and the room is properly insulated. Verify the settings on the control panel to ensure the desired temperature is set high enough.
Clean the unit thoroughly, especially the filter, and ensure it is completely dry. Store it in a cool, dry place away from direct sunlight or moisture. Cover it to prevent dust accumulation.