Denon AH-C160W Owner's Manual

To pair your Denon AH-C160W with a Bluetooth device, ensure the earbuds are turned off. Press and hold the multi-function button until the LED indicator flashes blue and red alternately. Then, search for "Denon AH-C160W" on your device's Bluetooth settings and connect.
First, check if the earbuds are properly charged. Ensure the earbuds are securely connected to your device. If the issue persists, try resetting the earbuds by turning them off and on again.
To reset the Denon AH-C160W, turn off the earbuds. Then, press and hold the multi-function button for about 10 seconds until the LED flashes blue and red twice, indicating a successful reset.
To clean your Denon AH-C160W earbuds, use a soft, dry cloth to wipe the exterior surfaces. For the ear tips, remove them and wash with mild soap and water. Ensure they are completely dry before reattaching them to the earbuds.
The Denon AH-C160W provides up to 4 hours of continuous playback on a full charge, and an additional 12 hours with the charging case.
To improve Bluetooth connection stability, ensure there are no obstructions between the earbuds and the paired device. Keep the device within a 10-meter range and avoid interference from other wireless devices.
If your Denon AH-C160W is not charging, check the USB cable and power source. Ensure the charging contacts on the earbuds and case are clean. Try using a different power source or USB cable if needed.
To update the firmware on your Denon AH-C160W, download the Denon audio app from the app store, connect your earbuds to the app via Bluetooth, and follow the on-screen instructions for the firmware update process.
Yes, the Denon AH-C160W is equipped with a built-in microphone, allowing you to make and receive phone calls. Use the multi-function button to answer or end calls.
The Denon AH-C160W has an IPX5 water resistance rating, meaning it is protected against sweat and light rain, making it suitable for workouts and outdoor use.