De Dietrich KDLV326J2 User Manual
![De Dietrich KDLV326J2 Dishwasher manual cover](/images/fBxOpjBCoHaEaQtPIfHYuQEi/thumbs/thumb175x175.webp)
To reset your De Dietrich KDLV326J2 dishwasher, press and hold the Start button for three seconds. This will initiate a reset and clear any error codes.
Check the drain hose for kinks and ensure that the filter is clean. Also, inspect the pump for any obstructions. If the issue persists, consult the user manual or contact a technician.
Regularly clean the filter and spray arms, check the door gasket for debris, and run a cleaning cycle with a dishwasher cleaner to prevent buildup.
Ensure that you are using a rinse aid, select a program with a drying cycle, and avoid overloading the dishwasher to allow proper air circulation.
Unusual noises may be caused by items inside the dishwasher obstructing the spray arms or loose parts. Ensure that all items are properly placed and check for any loose screws or components.
Ensure that the racks are properly aligned and that no dishes are obstructing the door. Check the door latch for any debris or damage.
Refer to the user manual for instructions on accessing the settings menu. Adjust the water hardness level based on your local water supply.
Potential causes of leaks include a damaged door gasket, a clogged filter, or a loose hose connection. Inspect these areas and replace or repair as necessary.
While some non-dish items can be cleaned in the dishwasher, always check the manufacturer's recommendations for each item to ensure they are dishwasher safe.
Ensure that the dishwasher is properly plugged in and that the circuit breaker has not tripped. Check that the door is fully closed and latched, and inspect the control panel for any error codes.