De Dietrich DWSL980X User Manual

To set the temperature, press the temperature control button on the control panel. Use the "+" and "-" buttons to adjust to your desired temperature. The display will show the current setting.
Ensure the wine cellar is plugged in and the power is on. Check that the door is closing properly and the seal is intact. If the issue persists, contact a qualified technician for service.
It is recommended to clean the filters every 3 to 6 months, depending on the usage and environment. This helps maintain efficient operation.
Yes, you can store open bottles, but it is advisable to use a wine stopper to prevent oxidation and maintain quality.
The ideal humidity level for wine storage is between 50% and 70%. The DWSL980X is designed to maintain this range.
To prevent frost build-up, ensure the door is properly sealed and avoid opening it frequently. Also, check that the temperature setting is not too low.
First, check the bulb and replace it if necessary. If the light still does not work, inspect the wiring or consult a technician.
To reset the control panel, unplug the wine cellar for a few minutes, then plug it back in. This should reset the system.
Some noise is normal as the unit operates, including humming or slight vibrations. Loud or unusual noises should be investigated by a technician.
To maximize energy efficiency, ensure the door is sealed tightly, keep the unit away from heat sources, and maintain the recommended temperature settings.