De Dietrich DVY640JE1 User Manual

To start a wash cycle, load your dishwasher, add detergent, close the door, select the desired wash program using the control panel, and press the start button.
Check the filter and drain pump for blockages. Ensure the drain hose is not kinked or clogged. Clean the filters and remove any debris. If the problem persists, consult a technician.
Remove the lower rack, twist the filter counterclockwise, and lift it out. Rinse under running water to remove debris. Reinsert and lock the filter by twisting it clockwise.
Ensure dishes are correctly loaded, avoiding overcrowding. Check the spray arms for blockages and clean them if necessary. Verify that you are using the correct detergent and cycle for the load.
To reset the dishwasher, press and hold the start/pause button for about 3 seconds until the display clears. You may also turn off the dishwasher and unplug it for a few minutes before restarting.
Unusual noises may be caused by improperly loaded dishes or utensils touching the spray arms. Ensure items are secured and not obstructing the spray arms. Check for foreign objects in the filter and pump.
It's recommended to clean the filters and spray arms monthly to ensure optimal performance and prevent blockages.
Check the door seal for damage or debris. Ensure the dishwasher is level. Inspect the water inlet and drain hoses for leaks. Replace any faulty components.
Use only dishwasher-specific detergents. Avoid using regular dish soap as it may cause excessive suds and damage the machine. Follow the manufacturer's guidelines for the best results.
Ensure the door is fully closed and latched. Check that the dishwasher is plugged in and the circuit breaker is not tripped. Verify that the water supply is turned on.