De Dietrich DVY1010B User Manual
![De Dietrich DVY1010B Dishwasher manual cover](/images/pIASeMJaoXzhZnZQrsSnuPZC/thumbs/thumb175x175.webp)
To reset your De Dietrich DVY1010B dishwasher, press and hold the start button for 3 seconds until the display shows a reset message. This will clear any current programs and errors.
Check if the drain hose is kinked or blocked. Ensure that the filter is clean and free from debris. If the problem persists, inspect the pump for any obstructions.
Remove the lower dish rack to access the filter. Turn the filter counterclockwise and lift it out. Rinse it under warm water to remove any food particles and debris. Reinstall the filter by placing it back and turning it clockwise until it locks in place.
Spots on glassware are often caused by hard water. Ensure that the rinse aid compartment is full, and consider using a water softener or additive if your water is particularly hard.
Check that the dishwasher door is fully closed and latched. Ensure that the power cord is plugged in and that the circuit breaker has not tripped. Also, confirm that the water supply is turned on.
It's recommended to clean the spray arms every 3 to 6 months. Remove them by unscrewing or unclipping, then rinse under water to remove any clogs or debris.
Regularly clean the filter and spray arms, check and refill the rinse aid, and run an empty cycle with a dishwasher cleaner to remove grease and mineral buildup.
Unusual noises may be due to items in the dishwasher touching the spray arms, or debris caught in the pump or motor. Check for obstructions and ensure all items are properly loaded.
Ensure the rinse aid dispenser is filled, use a high heat drying option if available, and open the dishwasher door slightly after the cycle to allow excess moisture to escape.
Ensure that dishes are not blocking the spray arms and that the detergent dispenser is not clogged. Use the recommended amount of detergent and check that the water temperature is sufficiently hot.