De Dietrich DVH910JE1 User Manual
![De Dietrich DVH910JE1 Dishwasher manual cover](/images/XmXVTCmdtQWYbDSdtlqYaMrP/thumbs/thumb175x175.webp)
To reset the De Dietrich DVH910JE1 dishwasher, press and hold the start button for approximately 5 seconds until the display clears or resets.
If the dishwasher does not start, check if the door is properly closed and latched, and ensure that the power supply is connected. Also, verify that the water supply valve is open.
To clean the filter, remove the bottom rack, twist the filter assembly counterclockwise, and take it out. Rinse under running water to remove debris, then reinstall.
Check for clogs in the drain hose or filter, and ensure the sink's drain is clear. Also, verify that the drain pump is functioning correctly.
Open the rinse aid dispenser and adjust the dial inside to the desired level, typically ranging from 1 to 6, depending on your water hardness and preferences.
Error code "E4" indicates a water overflow issue. Check for blockages in the filter and ensure the float switch is not stuck.
Clean the spray arms every 3 months by removing them and rinsing under warm water, ensuring that all holes are clear of debris.
Yes, you can use dishwasher tablets. Place the tablet in the detergent dispenser and ensure it is compatible with your water hardness level.
Ensure you are using the correct amount of detergent and rinse aid. Check that the water temperature is at least 120°F (49°C) for optimal cleaning.
Wipe the exterior with a soft, damp cloth and mild detergent. Avoid abrasive cleaners that could damage the finish.