De Dietrich DVH710BE1 User Manual
![De Dietrich DVH710BE1 Dishwasher manual cover](/images/AQxOJHCDxtarNhUZPRuNWFwJ/thumbs/thumb175x175.webp)
To reset the De Dietrich DVH710BE1 dishwasher, press and hold the start button for about 3 seconds until the lights on the control panel flash. Release the button and the dishwasher should reset.
Ensure that the drain hose is not kinked or clogged. Check the filter and clean it if necessary. Make sure that the sink drain is clear and not blocked.
Remove the lower rack to access the filter at the bottom of the dishwasher. Rotate the filter counterclockwise to unlock it and lift it out. Rinse it under running water to remove debris. Reinsert and lock it back in place.
Unusual noises can be caused by items touching each other or the spray arms. Ensure dishes are loaded properly and that nothing obstructs the spray arms. Check for foreign objects in the filter or pump area.
Foul odors can occur if food particles are trapped in the filter or if the dishwasher is not used regularly. Clean the filter and run a cleaning cycle with a dishwasher cleaner or vinegar.
Open the rinse aid dispenser cap, located on the inner door panel. Adjust the setting using a small screwdriver to increase or decrease the amount dispensed. Close the cap securely.
Load larger items like pots and pans on the bottom rack and smaller items like glasses and bowls on the top rack. Ensure all items are slightly angled for better water flow and avoid blocking the spray arms.
Yes, you can use dishwasher tablets. Place the tablet in the main detergent compartment and close the lid. Ensure the water temperature is at least 120°F for effective cleaning.
Check that the door is fully closed and latched. Ensure the dishwasher is plugged in and that the circuit breaker has not tripped. Verify that the water supply is turned on.
Regularly clean the filter, check and clean the spray arms, inspect the door seals for debris, and run an empty cycle with a dishwasher cleaner monthly to maintain efficiency.