De Dietrich DVH1538X User Manual
![De Dietrich DVH1538X Dishwasher manual cover](/images/KcncMfcYQLFKJfNpgFDKTcLI/thumbs/thumb175x175.webp)
To start a wash cycle, first load your dishes and add detergent. Close the dishwasher door and select the desired wash program using the control panel. Finally, press the Start button to begin the cycle.
If the dishwasher is not draining, check the filter and drain hose for blockages. Ensure the drain hose is not kinked and that the sink drain is clear. If the problem persists, it may require professional servicing.
To clean the filter, remove the lower dish rack and unscrew the filter assembly located at the bottom of the dishwasher. Rinse the filter under running water to remove debris, then reassemble and secure it back into place.
The "E4" error code indicates a water overflow problem. Check for any leaks and ensure the dishwasher is level. Inspect the water inlet valve and float switch for proper operation. If issues persist, contact customer service.
It is recommended to clean the spray arms every 3-4 months. Remove the spray arms and rinse them under water to clear any blockages. Use a toothpick to clean any clogged holes. Reattach the spray arms after cleaning.
Unusual noises can be caused by improperly loaded dishes or items obstructing the spray arms. Ensure that dishes are securely placed and not touching each other. Check the spray arms for obstructions and ensure they rotate freely.
Regular maintenance includes cleaning the filters, checking and cleaning spray arms, inspecting the door seal for debris, and wiping down the interior. Descale the dishwasher periodically to prevent mineral build-up.
To reset the dishwasher, turn off the power by unplugging it or switching off the circuit breaker for a few minutes. Restore power and attempt to restart the dishwasher. If issues persist, consult the manual or customer support.
It is recommended to use dishwasher-specific detergents for optimal performance. Avoid using regular dish soap as it can cause excessive sudsing and potentially damage the appliance.
Check for any obstructions around the door and ensure that the racks are properly aligned. Inspect the door latch mechanism for damage and clean any debris. If the issue continues, the latch may need to be replaced.