De Dietrich DVH1344J User Manual
![De Dietrich DVH1344J Dishwasher manual cover](/images/BxXNOYtqkhYPMwtPQvCPQVEw/thumbs/thumb175x175.webp)
To start a wash cycle, load the dishwasher, add detergent, select the desired program using the control panel, and press the start button. Ensure the door is securely closed.
Check the filter and drain hose for blockages. Ensure the sink drain is not clogged. Clean any debris and restart the dishwasher. If the problem persists, consult the user manual or contact customer service.
Locate the filter at the bottom of the dishwasher, twist to remove it, and rinse it under warm water. Ensure all debris is removed before reinstalling it back into the dishwasher.
Error codes indicate specific issues. Refer to the user manual for a list of codes and their meanings. Common errors could relate to water supply, drainage, or door latch issues.
Clean the spray arms every few months or if you notice poor cleaning performance. Remove them and rinse under water, using a toothpick to clear any blocked holes.
Unusual noises can result from items touching the spray arms or improperly loaded dishes. Ensure dishes are loaded correctly and check for obstructions in the spray arms.
Use rinse aid to enhance drying performance. Ensure dishes are loaded with enough space for air circulation, and use the appropriate drying setting.
Check if the dishwasher is plugged in and the door is closed properly. Ensure the water supply is on and the control panel settings are correct. Reset the circuit breaker if necessary.
To reset the dishwasher, turn off the power by unplugging it or switching off the circuit breaker for a few minutes, then restore the power. This can help clear minor electronic glitches.
Use only dishwasher-specific detergents. Avoid using regular dish soap as it can cause excessive suds and damage the appliance. Choose powders, gels, or tablets as per your preference.