De Dietrich DVH1245J User Manual
![De Dietrich DVH1245J Dishwasher manual cover](/images/TGARxLytOhLRLGZjHAsaeCNy/thumbs/thumb175x175.webp)
Ensure the dishwasher is properly plugged in and the door is securely closed. Check the circuit breaker and reset if necessary. Also, verify that the water supply is turned on.
To clean the filter, remove the lower rack and locate the filter at the bottom of the dishwasher. Turn it counterclockwise to remove, rinse under running water, and then replace it securely.
Error code E4 usually indicates a water overflow. Check for blockages in the filter, drain, and hoses. Ensure that the dishwasher is level to avoid water pooling.
To reset the dishwasher, turn it off and unplug it from the power source for about 10 minutes. Plug it back in and start a new cycle.
Check that the rinse aid dispenser is full, as this aids in drying. Ensure the selected cycle includes a drying phase and that the dishwasher is not overloaded.
Descale your dishwasher every 3-6 months, depending on the water hardness in your area, to prevent lime scale build-up and maintain optimal performance.
Inspect the door seal for damages and ensure it is clean. Check that the dishwasher is level and examine hoses for any cracks or loose connections.
No, using regular dish soap can cause excessive suds and potentially damage the dishwasher. Always use dishwasher-specific detergent.
Load larger and more soiled items on the bottom rack, and cups and smaller items on the top rack. Ensure items do not block the spray arms and face toward the center.
Unusual noises may be due to items touching the spray arms or a blockage in the pump. Ensure items are properly secured and check the filter and pump area for obstructions.