De Dietrich DVH1180GJ User Manual
![De Dietrich DVH1180GJ Dishwasher manual cover](/images/dtRsSEhsebidsCQoeLVnpwPH/thumbs/thumb175x175.webp)
To reset your De Dietrich DVH1180GJ Dishwasher, press and hold the start button for approximately 3 seconds until the control panel lights flash. This will reset the dishwasher settings.
Check if the drain hose is kinked or clogged. Make sure the sink drain is clear. Clean the dishwasher filter and ensure the pump is not blocked.
To clean the filter, remove the lower dish rack, unscrew the filter assembly located at the bottom of the dishwasher, rinse it under running water, and reassemble it back securely.
Loud noises may be due to items hitting each other or the spray arms. Ensure dishes are correctly loaded and not obstructing the spray arms. Check for any debris in the pump.
It is recommended to clean the spray arms every 2-3 months to ensure optimal performance. Remove them and rinse under warm water to clear any blockages.
Error code E4 indicates a problem with the water inlet. Check the water supply, ensure the inlet hose is not kinked, and clean the water inlet filter.
Place larger items like pots on the bottom rack and smaller items on the top rack. Ensure no items block the spray arms and avoid nesting dishes to allow water flow.
Check if the rinse aid dispenser is filled and the correct drying cycle is selected. Ensure plastic items are placed in a way that allows water to drain off.
Regularly clean the filters, use the correct amount of detergent, ensure the spray arms are not blocked, and run the dishwasher on a hot cycle occasionally to remove grease buildup.
Regularly clean the filters, inspect and clean the spray arms, check the drain hose for obstructions, wipe the door seals, and run a cleaning cycle with dishwasher cleaner monthly.