De Dietrich DVH1150XA User Manual
![De Dietrich DVH1150XA Dishwasher manual cover](/images/JbLThRlnSDnPTaaISMvJocfX/thumbs/thumb175x175.webp)
To reset the De Dietrich DVH1150XA Dishwasher, press and hold the Start/Reset button for a few seconds until the display clears or resets. Ensure that the dishwasher is not running any cycle when performing the reset.
Check for clogs in the drain hose, filters, or air gap. Clean out any debris that may be obstructing the drain. Ensure that the sink drain is not blocked and the garbage disposal is clear.
It is recommended to clean the filter every month to ensure optimal performance and prevent food particles from clogging the system. Simply remove the filter and rinse it under running water.
Use a high-quality dishwasher detergent that is suitable for automatic dishwashers. Avoid using regular dish soap as it can cause excessive suds and damage the machine.
Spots can be caused by hard water or insufficient rinse aid. Ensure that the rinse aid compartment is filled and consider using a water softener if you have hard water.
Refer to the user manual to enter the settings menu on your dishwasher. Adjust the water hardness setting according to your local water supply. This setting helps optimize the dishwasher's performance.
Check for obstructions around the door seal and ensure that the racks are properly aligned. Inspect the door latch for any damage and replace it if necessary.
Ensure that the dishwasher is properly plugged in and the circuit breaker is not tripped. Check that the door is firmly closed and the Start button is pressed. Verify that the water supply is turned on.
Regularly clean the filter and run an empty cycle with a cup of white vinegar placed in the top rack. This will help eliminate odors and keep the interior fresh.
Routinely clean the filter, inspect and clean the spray arms, check for any blockages, and ensure that the door seal is free of debris. Regular maintenance helps to ensure efficient operation.