De Dietrich DVH1054B User Manual
![De Dietrich DVH1054B Dishwasher manual cover](/images/CtgGajdcYVedamlRkYcUnsJX/thumbs/thumb175x175.webp)
To reset the De Dietrich DVH1054B dishwasher, press and hold the Start/Reset button for about 3 seconds until the indicator lights start flashing. This will reset the appliance and clear any existing cycles or settings.
First, check the drain filter and remove any debris. Ensure the drain hose is not kinked or blocked. If the problem persists, check the drain pump for obstructions.
Remove the lower dish rack, twist the filter counterclockwise, then lift it out. Rinse under running water to remove debris, and replace it by twisting clockwise until secure.
Ensure the door is fully closed and latched. Check the power supply and make sure the circuit breaker is not tripped. Also, verify that the Start button is properly pressed.
It is recommended to clean the spray arms every 3-4 months. Remove them by unscrewing the retaining nut, rinse under warm water, and use a toothpick to clear any blockages in the holes.
Ensure you are using the correct amount and type of detergent. Check if the rinse aid is adequately filled. Hard water can also cause residue, consider using a water softener.
Some noise is normal, such as water spraying and motor sounds. However, loud or unusual noises may indicate a problem with the pump or foreign objects in the machine.
Consult the user manual to identify the control panel settings. Adjust the water hardness setting by pressing the appropriate buttons until the desired level is displayed.
Regularly clean the filter, spray arms, and door seals. Run a cleaning cycle with dishwasher cleaner monthly. Check hoses for wear and ensure the machine is level.
Clean the filter and run a dishwasher cleaner cycle monthly. Leave the door ajar after use to allow air circulation. Periodically wipe down the door seals and interior with a damp cloth.