De Dietrich DVF910WE1 User Manual
![De Dietrich DVF910WE1 Dishwasher manual cover](/images/bpgeUrvxKmauXyzqQSLLtLoY/thumbs/thumb175x175.webp)
To reset the De Dietrich DVF910WE1 dishwasher, press and hold the start button for about 3 seconds until the indicator lights turn off, indicating the reset process has completed.
Check the filter and drain hose for blockages. Clean the filter and ensure the drain hose is not kinked or clogged. Refer to the user manual for detailed cleaning instructions.
Unusual noises can be caused by items inside the dishwasher interfering with the spray arms. Ensure that dishes and utensils are properly placed and not obstructing the arms.
It is recommended to clean the filters once a month to ensure optimal performance and to prevent blockages.
Place larger items like pots and pans on the bottom rack and smaller items like cups and glasses on the top rack. Ensure that dishes do not block the spray arms.
Ensure rinse aid is being used, select a higher temperature wash program, and open the door slightly after the cycle ends to allow moisture to escape.
Error code "E4" indicates a water leakage problem. Check for leaks in the hose connections and the base of the dishwasher. Ensure the dishwasher is level.
No, regular dish soap should not be used as it can cause excessive suds and damage the dishwasher. Always use dishwasher-specific detergents.
Run an empty cycle with a dishwasher cleaner or a cup of vinegar on the hottest setting to remove any build-up or odors inside the appliance.
Ensure the water supply valve is open, check for kinked or blocked hoses, and inspect the inlet valve for any faults. If the problem persists, consult a technician.