De Dietrich DTI1101X User Manual

To unlock the De Dietrich DTI1101X hob, press and hold the lock button until the lock indicator light turns off. This usually takes about 3 to 5 seconds.
If the hob does not heat up, ensure that it is properly connected to the power supply. Verify that the cookware is suitable for induction cooking and is correctly placed on the hob. Also, check if the child lock is activated.
To clean the hob, use a soft cloth with a mild detergent. Avoid abrasive cleaners or scouring pads which can scratch the glass surface. For stubborn stains, use a hob scraper at a shallow angle.
Error code F0 typically indicates an issue with the power supply. Check the electrical connections and ensure the hob is properly plugged in. If the issue persists, contact a qualified technician.
To activate the boost function, select the cooking zone and press the boost button. The boost function provides maximum power for rapid heating and will automatically deactivate after a set period.
The buzzing noise is normal for induction hobs and is caused by the magnetic fields in operation. It may vary with different types and sizes of cookware.
To prevent scratches, always lift cookware rather than sliding it across the hob. Use cookware with smooth, flat bottoms and avoid using abrasive cleaning materials.
To maintain energy efficiency, use cookware that matches the size of the cooking zone and keep lids on pots to reduce cooking time. Also, use the residual heat after switching off the hob.
To reset the hob to factory settings, refer to the user manual for specific instructions as this may involve entering a service mode or sequence of button presses.
The hob is compatible with induction-ready cookware, typically made of ferrous metals such as cast iron or stainless steel with a magnetic base. Check for an induction mark on the cookware packaging.