De Dietrich DRH615JE User Manual
![De Dietrich DRH615JE Refrigerator manual cover](/images/qCLgYyQUCpyQHTFKlDwLWWPt/thumbs/thumb175x175.webp)
To adjust the temperature settings, locate the control panel inside the refrigerator. Use the temperature control buttons to set your desired temperature for both the fridge and freezer compartments.
First, check if the refrigerator is plugged in and the power is on. Ensure that the temperature settings are correct. Clean the condenser coils and check the door seals for any gaps or damage. If the issue persists, consult a technician.
The De Dietrich DRH615JE is typically frost-free, but if you notice frost build-up, defrost the freezer once or twice a year or as needed.
To clean the interior, unplug the refrigerator and remove all food items. Use a mixture of mild detergent and warm water to wipe down the shelves and walls. Rinse with clean water and dry thoroughly before restocking.
Ensure the door seals are airtight, avoid frequent door opening, and keep the refrigerator away from heat sources. Setting the temperature to the recommended levels and regularly cleaning the condenser coils can also improve efficiency.
Common error codes include E1 (temperature sensor issue), E2 (defrost sensor problem), and E3 (fan malfunction). Refer to the user manual for detailed troubleshooting steps.
To change the light bulb, unplug the refrigerator, locate the light cover inside the fridge, and remove it. Replace the old bulb with a new one of the same type and wattage, then reattach the cover.
Water leakage inside the refrigerator can be caused by a blocked defrost drain. Clean the drain hole with warm water and ensure it is clear of debris.
After a power outage, the refrigerator should automatically reset. If not, unplug it for a few minutes and then plug it back in. Check the temperature settings and adjust if necessary.
Regular maintenance tasks include cleaning the condenser coils, checking and cleaning the door seals, and ensuring the refrigerator is level. Additionally, check the temperature settings and clear any blockages in the defrost drain.