De Dietrich DRH315JE2 User Manual
![De Dietrich DRH315JE2 Refrigerator manual cover](/images/yHkhzQrPyAQzkOgISEGLcxzf/thumbs/thumb175x175.webp)
To adjust the temperature, locate the control panel inside the refrigerator. Use the '+' and '-' buttons to set your desired temperature. The display will show the current setting.
First, check if the door is fully closed and the seal is intact. Ensure the temperature settings are correct. Clean the condenser coils if they are dirty, and check if the vents inside the fridge are unobstructed.
Locate the water filter compartment, typically at the bottom of the refrigerator. Turn the old filter counterclockwise to remove it. Insert the new filter and turn it clockwise until it locks into place.
It is recommended to clean the condenser coils every six months, replace the water filter every six months, and check the door seals regularly for any signs of wear or damage.
To manually defrost the freezer, unplug the refrigerator and remove all items. Leave the freezer door open to allow the ice to melt. Use towels to absorb the water and clean the interior once defrosting is complete.
Unusual noises can be due to the refrigerator not being level. Check and adjust the leveling legs. If the noise persists, ensure that nothing inside the fridge is vibrating against the walls.
Ensure the refrigerator is placed away from heat sources and has adequate ventilation. Keep the door seals clean and airtight, and avoid frequently opening the doors.
Error code 'E1' typically indicates a problem with the temperature sensor. Check if the sensor is properly connected and not damaged. If the issue persists, contact customer support.
It is recommended to clean the interior of your refrigerator at least once a month to prevent odors and maintain hygiene. Use a mild detergent and warm water for cleaning.
Water leakage can be caused by a clogged defrost drain or a faulty water line. Inspect the drain for blockages and clear them. Check the water line connections for any leaks or damage.