De Dietrich DRH314JE2 User Manual

To adjust the temperature, locate the digital control panel inside the refrigerator. Use the '+' and '-' buttons to set your desired temperature for both the refrigerator and freezer compartments.
First, check if the power cord is properly plugged in and the outlet is functioning. Ensure the temperature settings are correct. Clean the condenser coils and make sure the vents inside the refrigerator are not blocked. If the issue persists, contact a professional technician.
The DRH314JE2 model is equipped with a no-frost system, so manual defrosting is not necessary. However, if you notice ice buildup, check the door seals and ensure the door is closing properly.
To clean the interior, unplug the refrigerator and remove all food items. Use a mixture of mild dish soap and warm water to wipe down shelves and surfaces. Rinse with clean water and dry thoroughly before plugging the appliance back in.
To change the light bulb, first unplug the refrigerator. Locate the light cover inside the refrigerator compartment, remove it, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Unusual noises can result from the refrigerator not being level, objects vibrating on top of it, or the condenser fan. Check these areas and adjust as needed. If the noise persists, consult a technician.
Ensure the door seals are intact and clean, keep the refrigerator full but not overcrowded, and avoid placing hot items directly inside. Regularly clean the condenser coils and ensure the refrigerator is positioned away from heat sources.
Check if the ice maker is turned on and connected to the water supply. Inspect the water line for any kinks or blockages. If everything seems fine and it still doesn't work, you may need to call for service.
To reset the control panel, unplug the refrigerator for about 5 minutes, then plug it back in. This should reset the system. If issues persist, consult the user manual or contact customer support.
Regularly clean the condenser coils, check and clean the door seals, defrost the freezer if needed, and ensure the refrigerator is level. Also, check the water filter if applicable and replace it according to the manufacturer's instructions.