De Dietrich DRC1212J User Manual

To adjust the temperature settings, locate the control panel inside the refrigerator. Use the temperature adjustment buttons to select the desired temperature for both the fridge and freezer compartments.
Check if the door is sealing properly, ensure the vents inside are not blocked, and verify that the temperature settings are correct. If the issue persists, consider contacting a professional technician for further diagnosis.
The DRC1212J is typically a frost-free model, meaning manual defrosting is not usually necessary. However, if ice buildup occurs, it may need to be defrosted manually.
To clean the interior, unplug the refrigerator and remove all food and shelves. Use a mixture of mild detergent and warm water to wipe down the surfaces. Rinse with clean water and dry thoroughly before replacing the shelves and food.
Error code E1 typically indicates a sensor malfunction. It is advisable to consult the user manual for specific troubleshooting steps or contact customer service for assistance.
To change the light bulb, unplug the refrigerator, locate the light cover inside the fridge, and remove it. Unscrew the old bulb and replace it with a new one of the same type and wattage. Reattach the light cover and plug the refrigerator back in.
Water pooling might be due to a blocked defrost drain. To resolve this, clear the drain hole located at the back of the fridge using a pipe cleaner or similar tool.
Yes, the door on the DRC1212J can be reversed. Refer to the installation manual for detailed instructions on reversing the door swing.
To replace the water filter, locate the filter compartment, twist the old filter counterclockwise to remove it, and insert the new filter by twisting it clockwise until it locks into place.
Place raw meats on the bottom shelf to prevent cross-contamination, store dairy products in the colder sections, and keep fruits and vegetables in designated drawers. Avoid overcrowding to ensure proper air circulation.