De Dietrich DME715B User Manual
![De Dietrich DME715B Microwave Oven manual cover](/images/WlSAjNlzvYUsOTItOwgHfWAk/thumbs/thumb175x175.webp)
To set the clock, press the 'Clock' button and then use the rotary knob to adjust the hours. Press 'Clock' again and adjust the minutes using the rotary knob. Press 'Clock' once more to confirm the time.
To clean the interior, wipe it with a soft cloth dampened with mild detergent. Avoid using abrasive cleaners or scouring pads. For stubborn stains, heat a bowl of water with lemon juice for a few minutes and then wipe away the loosened grime.
If the microwave isn’t heating, check that the door is properly closed and the turntable is correctly positioned. If these are not the issues, a faulty magnetron or high voltage diode could be the cause, and professional service may be required.
To defrost food, press the 'Defrost' button, then select the food type and enter the weight using the keypad. The microwave will automatically set the defrost time and power level.
If the display is not working, check if the microwave is plugged in and the circuit breaker is not tripped. If the unit is getting power but the display still doesn’t work, it might be a faulty control board that requires professional repair.
No, you should not use metal containers or utensils in the microwave as they can cause sparks and damage the appliance. Use microwave-safe glass or plastic containers instead.
The charcoal filter should be replaced every 6 to 12 months, depending on usage. Frequent cooking may require more regular replacement to maintain optimal performance.
Some noise is normal, such as the fan or turntable motor operating. However, if you hear unusual or loud noises, it might indicate an issue with the turntable or other internal components that need checking.
For reheating leftovers, use a medium power level (50-70%). This helps to evenly distribute heat without overcooking or drying out the food.
To perform a hard reset, unplug the microwave from the power source and wait for at least 10 minutes before plugging it back in. This can help resolve minor electronic glitches.