De Dietrich 6545LIL User Manual

The ideal temperature setting for the refrigerator compartment is between 3°C to 5°C, and for the freezer, it should be set to -18°C.
To change the water filter, locate the filter compartment inside the refrigerator, twist the old filter counterclockwise to remove it, and then install the new filter by twisting it clockwise until it locks in place.
Check if the door seals are tight, ensure there is adequate ventilation around the refrigerator, and verify that the temperature settings are correct. If the problem persists, consider contacting a service professional.
The De Dietrich 6545LIL is equipped with a no-frost system, so manual defrosting is not necessary. However, it's recommended to clean it annually to ensure optimal performance.
Pooling water could be due to a blocked defrost drain. Try clearing the drain with warm water or a pipe cleaner to resolve the issue.
To improve energy efficiency, ensure the door seals are intact, avoid overloading the refrigerator, keep it away from heat sources, and periodically clean the condenser coils.
First, check if the bulb is burnt out and replace it if necessary. If the light still does not work, inspect the light switch and wiring for faults.
Unplug the refrigerator, remove all food items, and use a mixture of mild detergent and warm water to clean the interior surfaces. Dry thoroughly before plugging back in and restocking.
Ensure the refrigerator is level and not touching any walls or cabinets. Check for any loose components or items inside that might be vibrating. If the noise continues, contact a technician.
To reset the control panel, unplug the refrigerator for about 5 minutes, then plug it back in. If the panel does not reset, consult the user manual or contact customer support.