De Dietrich 1HF-14EB User Manual
![De Dietrich 1HF-14EB Washing Machine manual cover](/images/mboYaMvqLxhcsMnStrctkeZB/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum, add the appropriate detergent, and close the door securely. Select the desired wash program using the program selector, adjust the settings if necessary, and press the start button to initiate the cycle.
If the washing machine does not start, ensure that it is properly plugged in and that the power supply is functioning. Check that the door is closed securely and that the start/pause button has been pressed. If the problem persists, consult the user manual or contact customer support for assistance.
To clean the detergent drawer, first remove it by pulling it out gently. Rinse the compartments under warm water to remove any detergent residue. Clean any remaining deposits using a soft brush. Once cleaned, dry the drawer thoroughly and slide it back into place.
Excessive vibration may be caused by an unbalanced load or uneven floor surface. Ensure that the washing machine is level and that the laundry inside the drum is evenly distributed. Avoid overloading the machine, and consider adjusting the load for balance.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the filter, ensuring the drum is free of foreign objects, and wiping the door seal to prevent mold buildup. It is also recommended to perform a maintenance wash with a washing machine cleaner periodically.
To manually drain the water, locate the drain filter at the bottom front of the machine. Place a shallow pan or towel beneath it to catch water. Slowly unscrew the filter cap to allow the water to drain out. Once drained, ensure the filter is clean before securing the cap back in place.
A foul odor may be due to mold or residue buildup. To fix it, run a hot wash cycle with a washing machine cleaner or a mixture of vinegar and baking soda. Additionally, regularly clean the door seal and detergent drawer, and leave the door open after washes to allow the interior to dry.
If clothes are not spinning properly, check if the load is too small or too large, as this can affect spinning efficiency. Ensure that the drain hose is not kinked or blocked and that the filter is clean. Also, verify that the spin cycle is correctly selected.
To reset the washing machine, first turn it off and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. If the error code persists, refer to the user manual for specific troubleshooting steps related to that code.
If the washing machine is leaking, check if the door seal is damaged or if there is any debris preventing it from sealing properly. Inspect the water inlet and drain hoses for any signs of damage or loosening. Tighten or replace hoses as needed, and ensure the detergent drawer is not overfilled.