Cuisinart WCH-950 Instruction Booklet
![Cuisinart WCH-950 manual cover](/images/f80d4f48195769afa2f458c2/thumbs/thumb175x175.webp)
To set up the Cuisinart WCH-950, first unpack all components. Rinse the water tank and any removable parts with warm water. Place the unit on a flat surface, fill the tank with water, and plug it into a power outlet. Follow the instructions in the manual to complete the initial setup.
If the unit is not dispensing water, check if it is properly plugged in and the power is on. Verify that the water tank is filled and properly seated. Ensure there are no blockages in the water line and clean the filters if necessary.
The filter in the Cuisinart WCH-950 should be replaced every 3 to 4 months, depending on usage and water quality. Regular replacement ensures optimal performance and water purity.
Unusual noises could be due to air trapped in the water line or a misaligned water tank. Ensure the tank is properly seated and run a few dispensing cycles to clear any air. If the noise persists, contact customer support.
To clean the Cuisinart WCH-950, unplug the unit and remove the water tank. Wash the tank and removable parts with warm soapy water. Wipe the unit's exterior with a damp cloth. Do not immerse the unit in water.
It is recommended to use filtered or distilled water in the Cuisinart WCH-950 to prevent mineral buildup and ensure the best taste. Avoid using hard water as it may affect the unit's performance.
If the water tastes strange, check the filter and replace it if necessary. Clean the water tank and run a few cycles of water through the unit to flush out any impurities or residue.
To improve the lifespan, perform regular maintenance such as cleaning and filter replacement. Avoid overfilling the tank and ensure the unit is used in a well-ventilated area. Follow the manufacturer's guidelines for usage and care.
Some condensation is normal, especially in humid environments. Ensure the unit is placed in a well-ventilated area and wipe away excess moisture to prevent water damage.
A flashing power light can indicate a power issue or a need for maintenance. Check the power connection, ensure the water tank is properly seated, and check for any error messages. If unresolved, consult the manual or contact customer support.