Cuisinart DGB-700BC Instruction Booklet
![Cuisinart DGB-700BC manual cover](/images/b9b17f32ad77e6eccaec4e79/thumbs/thumb175x175.webp)
To clean the grinder, first unplug the machine and remove the hopper. Use a soft brush to clean the grinder blades and remove any coffee residue. Reassemble the parts and run a cleaning cycle with water only.
Ensure that the unit is plugged in and the water reservoir is filled. Check that all parts are assembled correctly, including the carafe and filter basket. Make sure the lid of the carafe is closed tightly.
It is recommended to replace the charcoal water filter every 60 days or after 60 uses to maintain optimal flavor and performance.
For a medium brew strength, use a medium grind setting. Adjust the grind size depending on your taste preference and the type of coffee beans used.
Ensure you are using the correct amount of coffee beans for your desired cups of coffee. Do not overfill the filter basket. Use medium grind settings to prevent clogging.
Check the grind size setting; a finer grind will produce stronger coffee. Ensure you are using the correct coffee-to-water ratio. Also, verify the freshness of your coffee beans.
Yes, you can use pre-ground coffee by turning off the grinder feature. Simply add the ground coffee to the filter basket and proceed with brewing.
To descale, fill the water reservoir with a mixture of one-third white vinegar and two-thirds water. Run a brew cycle and then follow with two cycles of fresh water to rinse.
The loud noise can be due to coffee bean jams or debris stuck in the grinder. Clean the grinder and ensure the beans are not too oily or sticky.
Press the "Program" button to set the desired brew time using the hour and minute buttons. Ensure the AM/PM setting is correct and press "Program" again to activate the auto-brew feature.