Cuisinart DGB-2 Instruction Booklet
![Cuisinart DGB-2 manual cover](/images/64c69ac9b9a99e1671a17912/thumbs/thumb175x175.webp)
To clean the grinder, first unplug the coffee maker. Remove the bean hopper lid and use a dry brush to sweep out any coffee grounds. Follow up by wiping the area with a damp cloth. Ensure all parts are dry before reassembling.
If your coffee maker is not brewing, check that it is plugged in and the water reservoir is filled. Ensure the carafe is properly positioned and the filter basket is seated correctly. If issues persist, consult the user manual for troubleshooting steps.
Descale your Cuisinart DGB-2 every 3-6 months, depending on the hardness of your water. Use a mixture of one part vinegar to two parts water, run a brewing cycle, and then rinse with fresh water to remove any residue.
Yes, you can use pre-ground coffee by bypassing the grinder. Place the pre-ground coffee directly into the filter basket and proceed with the brewing process as usual.
To adjust the coffee strength, you can change the amount of coffee beans or pre-ground coffee used. The machine itself does not have a strength adjustment setting, so this must be done manually.
The Cuisinart DGB-2 is compatible with both paper filters and the included permanent mesh filter. Using a paper filter can result in a cleaner cup, while the mesh filter is more environmentally friendly.
To program the brew time, press the 'Program' button and use the hour and minute buttons to set your desired brew time. Ensure the 'Program' light is illuminated to confirm the setting.
Ensure that the warming plate is clean and functioning. If the problem persists, it could be due to a malfunctioning heating element. In such cases, consult the warranty or contact Cuisinart customer support.
If the grinder is not working, check if it is clogged with coffee grounds. Clean the grinder as per the manual instructions. If the issue continues, the grinder may need servicing or replacement.
To reset the coffee maker, unplug it for 30 seconds, then plug it back in. This can resolve minor electronic glitches. If the issue persists, refer to the user manual or contact customer support.