Cobra MR HH90 VP Owner's Manual
![Cobra MR HH90 VP manual cover](/images/9459ec6e9e507b4f5a4e086c/thumbs/thumb175x175.webp)
To charge the Cobra MR HH90 VP battery, connect the radio to the provided charging cable and plug it into a power source. Ensure the radio is turned off during charging. The charge indicator will display when charging is in progress.
If your Cobra MR HH90 VP is not turning on, check if the battery is fully charged. If the battery is charged and it still doesn't turn on, try resetting the device by removing and reinserting the battery.
To reset the Cobra MR HH90 VP, turn off the radio, press and hold the 'Mode' button, and turn the radio on while holding the button until the factory reset is confirmed on the display.
The maximum range of the Cobra MR HH90 VP is up to 6 miles over open water, though actual range may vary depending on environmental conditions and obstructions.
To switch channels, use the 'Channel Up' and 'Channel Down' buttons located on the side of the radio. You can scroll through the available channels until you find the desired one.
The Cobra MR HH90 VP has a battery level indicator on the display screen. When the battery is low, the indicator will show a low battery icon, and an audible alert may also sound.
The 'Tri-Watch' feature allows you to monitor three channels simultaneously, typically the emergency channel (16) and two user-selected channels, ensuring you never miss important communications.
To perform a radio check, select a working channel and transmit a message asking for a radio check. Wait for a response to confirm that your transmission is being received clearly.
Yes, the Cobra MR HH90 VP is designed to be waterproof and can be submerged in water. It is rated to IPX7 standards, meaning it can be submerged up to 1 meter for 30 minutes.
To lock the keypad, press and hold the 'Lock' button until the lock icon appears on the display. This prevents accidental changes to settings while carrying the radio.