Cobra MR HH475 Float BT Owner's Manual

To pair the Cobra MR HH475 Float BT with a Bluetooth device, turn on the radio and navigate to the Bluetooth settings. Enable Bluetooth and search for available devices. Select your device from the list and follow any prompts to complete the pairing process.
Ensure that the battery is fully charged and properly installed. Check the battery contacts for any debris or corrosion. If the problem persists, try a different battery or contact customer support.
To reset the radio to factory settings, turn off the radio, then hold down the 'Rewind' and 'Scan' buttons while turning it back on. This will restore the default settings.
Regularly clean the device with a soft, dry cloth to remove any dirt or salt build-up. Ensure that the battery is charged and stored properly when not in use. Avoid exposing the radio to extreme temperatures.
Press the 'Channel Up' or 'Channel Down' button to scroll through the available channels until you find the one you need.
Ensure that the radio is set to the correct channel and that the battery is sufficiently charged. Check the antenna for damage and ensure it is properly connected.
Press the 'Weather' button to access the weather channels, then press and hold the 'Weather Alert' button until the alert is activated. The radio will notify you of any weather alerts in your area.
Check the volume level and ensure it is not too low. Ensure that the speaker is not obstructed or damaged. If using Bluetooth, ensure that the device is within range and that there are no obstructions.
Turn off Bluetooth and other unused features when not in use, reduce screen brightness, and avoid transmitting for extended periods. Use power-saving mode if available.
Yes, the Cobra MR HH475 Float BT is waterproof and designed to withstand immersion in water. However, ensure all seals are intact and properly closed to maintain its waterproof integrity.