Clarke 6470617 CD1150 Instructions
![Clarke 6470617 CD1150 Dehumidifier manual cover](/images/BwTjEMjuuyPSjdktaiEWXFSc/thumbs/thumb175x175.webp)
To set up the Clarke 6470617 CD1150 Dehumidifier, unpack all components, place the unit on a flat, stable surface, and ensure it is positioned at least 20 cm away from walls or furniture. Insert the power plug into an appropriate electrical outlet and adjust the settings as desired.
If the dehumidifier does not start, check that it is plugged in and the power outlet is functional. Ensure the water tank is correctly seated and not full. Also, verify the humidity level settings and try resetting the unit by turning it off and on again.
To clean the filter, first turn off and unplug the dehumidifier. Remove the filter cover and take out the filter. Use a vacuum cleaner or wash it with lukewarm water and mild detergent. Allow the filter to dry completely before reinstalling it.
Regular maintenance includes cleaning the air filter every two weeks, checking and cleaning the water tank, and inspecting the coils for dirt buildup. Ensure the unit is unplugged before performing any maintenance tasks.
If the dehumidifier is not collecting water, check if the humidity setting is below the current room humidity. Ensure the room temperature is above 15°C (59°F), and the filter is clean. Inspect the coils for frost or ice buildup, which may require defrosting.
Loud or unusual noises may be due to an unlevel surface or loose components. Check that the unit is on a stable surface and tighten any loose screws or parts. If the noise persists, contact customer support for further assistance.
To increase efficiency, ensure doors and windows are closed while operating the dehumidifier. Regularly clean the filter and keep the unit away from dust-prone areas. Position the unit centrally in the room for better air circulation.
If the water tank is leaking, inspect it for cracks or damage. Ensure it is properly seated and the tank cover is securely closed. If damage is found, replace the tank or contact the manufacturer for a replacement.
The filter should be cleaned every two weeks and replaced every 6 months, or sooner if it shows signs of wear or damage. Always use the manufacturer-recommended filters for best performance.
It is not recommended to use an extension cord with the dehumidifier. If necessary, ensure the extension cord is rated for the unit's power requirements and is equipped with a grounding pin. For safety, it's best to plug the unit directly into a wall outlet.