Clarke 3503592 CIG91216 Instant Instructions
![Clarke 3503592 CIG91216 Instant Garage manual cover](/images/wtIKAVErluHisauQuTgjbFFd/thumbs/thumb175x175.webp)
To set up the Clarke 3503592 CIG91216 Instant Garage, first choose a flat, stable location. Lay out all parts and follow the included instruction manual, ensuring to securely anchor the structure using the provided stakes and tie-downs for stability.
For regular maintenance, you will need mild soap, water, a soft brush for cleaning, and a protective spray to prevent UV and mildew damage.
Ensure the fabric is taut during setup to prevent sagging. Regularly check and tighten the cover as necessary. Additionally, consider using a roof support pole or similar device to create a peak in the center of the roof.
If the fabric tears, use a fabric repair kit or heavy-duty adhesive tape designed for outdoor use. Clean and dry the area before applying the patch for best results.
To dismantle, remove any accessories and anchors first, then carefully take down the fabric cover. Disassemble the frame, ensuring all parts are clean and dry before storing in a cool, dry place.
Check that all connectors are properly seated and that poles are not bent or damaged. Ensure the ground is level and free from debris. Reassemble the frame according to the manual, adjusting as needed for alignment.
To enhance wind resistance, ensure all anchors are securely in place. Use additional tie-downs or weights on particularly windy days, and consider adding windbreaks around the structure.
During a snowstorm, regularly clear accumulated snow from the roof to prevent excessive weight. If possible, temporarily reinforce the structure or dismantle it to prevent damage.
Clean the fabric cover using a mixture of mild soap and water. Use a soft brush to gently scrub away dirt and debris, then rinse thoroughly with clean water and allow to air dry completely.
While the Instant Garage provides basic protection from the elements, it is not climate-controlled. Sensitive electronics should be stored in a more controlled environment where temperature and humidity can be managed.