Citizen G670 Instruction Manual
![Citizen G670 Watch manual cover](/images/fFUrjVesKExmMTJfsUVxnLsQ/thumbs/thumb175x175.webp)
To set the time, pull the crown out to the second click, rotate the crown to adjust the time, and then push it back in to start the watch.
If the watch stops, ensure it is properly charged by exposing it to light. If the problem persists, reset the watch by pulling out the crown and pressing the reset button, then adjust the time.
Avoid exposing the watch to hot water and steam, and ensure the crown is fully secured against the case. Have the watch's water resistance tested annually.
Expose the watch to natural or artificial light to charge it. Direct sunlight or fluorescent lighting provides the best results.
The power reserve can last up to 6 months on a full charge. Check the power reserve by pressing the button located at the 2 o'clock position.
Clean the watch with a soft cloth and mild soap solution. Avoid using solvents or chemicals. Rinse with fresh water if exposed to salt water.
Reset the hands by pulling out the crown, pressing the button at 2 o'clock for about 5 seconds, and then adjusting the hands to the correct position.
You should service your watch if it displays inaccurate timekeeping, water condensation appears under the crystal, or if the battery life shortens significantly.
Yes, the strap can be replaced using a spring bar tool. However, it is recommended to have it done by a professional to avoid damage.
Store the watch in a cool, dry place away from magnetic fields. Ensure it is fully charged before storage to maintain battery health.