Chicco Next Fit Max Zip User Guide
![Chicco Next Fit Max Zip Car Seat manual cover](/images/IolEreVBcOhdfBqKsyLAiZYY/thumbs/thumb175x175.webp)
To install using the LATCH system, locate the lower anchors in your vehicle seat. Connect the LATCH connectors from the car seat to these anchors, ensuring they click securely. Tighten the LATCH strap while pressing down on the car seat to ensure a snug fit. The seat should not move more than an inch side-to-side or front-to-back.
To adjust the harness height, squeeze the headrest adjustment handle at the top of the car seat and move the headrest up or down. Ensure the harness is at or just above your child’s shoulders for forward-facing and at or just below for rear-facing.
To clean the car seat cover, unzip and remove it from the seat. Follow the care label instructions: machine wash in cold water on delicate cycle and air dry. Avoid using bleach or ironing the cover.
Yes, the Chicco NextFit Max Zip is FAA approved for use on aircraft. Ensure the seat fits within the airline’s seat dimensions and secure it using the airplane seat belt as per the car seat manual instructions.
The Chicco NextFit Max Zip can be used rear-facing for children weighing between 4-50 lbs and up to 49 inches in height. It's recommended to keep children rear-facing as long as possible within these limits.
The car seat features a ReclineSure leveling system with nine positions. Use the bubble level indicators on the side of the seat to ensure it’s properly reclined according to your child’s age and the vehicle seat angle.
If the harness is twisting, untwist it by following the path of the belt and gently straightening it with your fingers. Ensure the harness is flat against your child’s body to prevent future twisting.
Check the installation tightness regularly, especially after long trips. Ensure the seat does not move more than an inch side-to-side or front-to-back. Periodic checks help maintain safety.
Chicco does not recommend using additional seat protectors, as they can interfere with the proper installation of the car seat. It’s best to follow the manufacturer’s guidelines to ensure safety.
Regular maintenance includes checking the harness and buckle for wear and debris, ensuring the cover is clean, and verifying that the installation remains tight. Inspect the car seat periodically for any damage or parts that need replacement.